Conventional Sliding Gates

Motorized sliding gates (conventional) are gates which use a ground mounted track for the gate wheels to move on. Tracked sliding gates can have larger opening widths. A pedestrian gate can be combined with these type of gates or a separate pedestrian gate can be built. Company can produce motorized sliding gates as per client’s requirements.

  • Planned and fabricated with superior square or rectangular hollow sections, along with MS sheets and flats collected by high quality welding
  • Gates are beautifully designed and the pre-tensioning of the gate leaf construction diminishes the risk of bending
  • Varied choice of models for gates weighing from 300 kg to 25000 kg
  • Manual operation in case of power failure
  • Highly condensed dimensions & very silent operation. Built-in anti jerk device stops damage to the automatic system
  • Startup at extreme power permits the motor to overcome any initial friction caused by ice, dust, etc. Motor protected by an internal thermal switch
  • Problem detection causes the gate movement to stop if an hindrance is detected
  • The advance electronic control unit licenses operation time adjustment, partial opening, reflex closing, step by step control, stop safety, reverse safety etc.
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Conventional Sliding Gates
Conventional Sliding Gates
Conventional Sliding Gates
Conventional Sliding Gates
Automatic Sliding Gate Manufacturers
Automatic Sliding Gate Manufacturers
Automatic Sliding Gate Manufacturers
Automatic Sliding Gate Manufacturers
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Automatic Sliding Gate
Conventional Sliding Gates
Conventional Sliding Gates
Conventional Sliding Gates
Conventional Sliding Gates
Automatic Sliding Gate Manufacturers
Automatic Sliding Gate Manufacturers
Automatic Sliding Gate Manufacturers
Automatic Sliding Gate Manufacturers
Gate TypeConventional Sliding Gates
ApplicationsIndustrial, Residential, Commercial, Warehouse, Airport, Shipyards, K4-Crash Rated or Any Entrance
Maximum Clear Width40000mm Single Leaf / 80000mm Double leaf (Bi-Parting)
Maximum Height3000 mm (*Larger dimensions available on request)
Opening DirectionHorizontal Straight
90 Degree curved (on request)
Opening SpeedUp to 0.16 m/s (*Up to 0.3 m/s on request)
Closing SpeedUp to 0.16 m/s (*Up to 0.3 m/s on request)
Security FeaturesCE marked according to the European Machinery Directive 2006/42/CE & Type tested according to EN 13241-1
PatternStandard Steel hollow tubular section,torsion free fully welded unit
Gate Frame / InfillsSquare or rectangular steel hollow tubular section
CladdingMild Steel / Galvanised Steel - Standard
Stainless Steel SS304 & SS316 / Aluminium sheets/ Polycarbonate / Acrylic / PVC Sheet / Wood / Fundermax panels on request
Bottom RailC channel with round polished bar
Bottom RollersItalian make Galvanised Wheels min 120mm dia. with ball bearings and axle with lubrication point
Full Height ColumnGalvanised adjustable upper guide brackets with Heavy Duty steel Box section
Guide RollersNylon Roller mounted on both side of column providing lateral support & smooth movement to the gate leaf
*Gate can be fabricated in any customized design including Ornamental Designs

Standard Specifications

  • 230V-1ph, N / 415V-3ph, N
  • Rack driven rugged and powerful drive unit with integral electronic control unit
  • Open / Emergency Stop / Close
  • 300Kg to 25000Kg
  • Intensive use
  • Operator : IP 44 (* Higher IP rating on request)
  • Key operated
  • Pair of Photocells with anodised aluminium vertical mountings
  • Flashing light

Additional Optional Accessories

  • Pair of Reverse Safety photocells
  • Key Selector, Remote Transmitter
  • Vertical Safety Edge
  • Between Gate & Boom Barriers or equipped with a client control unit

Standard Colours Similar To

  • Grey Primer RAL 7015
  • Silver RAL 9006
  • Grey RAL 7015
  • Blue RAL 5010
  • Orange RAL 2000

Optional Surface Finish

  • As Per ISO 1461:2022
  • As per ISO 12944 With Sand Blasting
*Other RAL available on request.

RELATED PRODUCTS

×
Enquire Now

Got a query? Kindly fill the form and we shall get back to you.


+00
×

Join Us

+00
Alternate Text Enquire Now Alternate Textsales@geapl.com Alternate Text+91-22-66720200 Alternate Text +91 9325045410